旋转泵
These are built in many different designs and are extremely popular in modern fluid-power system. The most common rotary-pump designs used today are spur-gear, generated-rotary , sliding-vane ,and screw pump ,each type has advantages that make it the most suitable for a given application .
旋转泵应用于不同的设计中，在流体动力系统中极其常用。今天最常用的旋转泵是外齿轮泵、内齿轮泵、摆线转子泵、滑动叶片泵和螺旋泵。每种类型的泵都有优点，适合于特定场合的应用。
Spur-gear pumps. these pumps have two mating gears are turned in a closely fitted casing. Rotation of one gear ,the driver causes the second ,or follower gear, to turn . the driving shaft is usually connected to the upper gear of the pump . (毕业设计)
直齿齿轮泵，这种泵有两个啮合的齿轮在密封壳体内转动。第一个齿轮即主动轮的回转引起第二个齿轮即从动轮的回转。驱动轴通常连接到泵上面的齿轮上。
When the pump is first started ,rotation of gears forces air out the casing and into the discharge pipe. this removal of air from the pump casing produces a partial vacuum on the pump inlet ,here the fluid is trapped between the teeth of the upper and lower gears and the pump casing .continued rotation of the gears forces the fluid out of the pump discharge .
当泵首次启动时，齿轮的旋转迫使空气离开壳体进入排油管。这种泵内空气运动使泵吸入口处形成了真空，于是外部油箱的液体在大气压的作用下，由泵的入口进入，聚集在上下齿轮和泵壳体之间，齿轮连续的旋转使液体流出泵的出口。
全文 5400字
外文翻译资(11)
< class="2638
