论文编号:JD799 论文字数:8648,页数:29
基于单片机的电器遥控器的设计
摘 要：本文详细介绍了电器遥控器的特点，结构和工作原理。红外遥控技术是一种利用红外线进行点对点通信的技术，它是把红外线作为载体的遥控方式。由于红外线的波长远小于无线电波的波长，因此在采用红外遥控方式时，不会干扰其他电器的正常工作，也不会影响临近的无线电设备。该方案采用模块化设计，主要分为两个模块：红外发射模块和红外接收模块。所设计的遥控器能控制5个电器的电源开关，并且可对一路电灯进行亮度的调节。该设计可以遥控多种家用电器，节省了能源，操作非常简单，可扩展性强，只要稍加改变，即可增加其他使用功能。
关键字：遥控电路；红外发射；红外接收；单片机
A Design about the Tele-controller Based on SCM
Abstract: This article introduced the electric appliance remote control characteristic in detail, the structure and the principle of work. The infrared remote control technology is one kind carries on the point-to-point communication using infrared the technology, It is takes infrared the carrier the remote control way. Due to the long-wave infrared wavelengths than radio waves, Therefore, in the manner of the use of infrared remote control, does not interfere with the normal operation of other electrical appliances, It also will not affect radio equipment nearby. Modular design of the program can be broadly divided into two modules: infrared transmitter and infrared receiver module. I designed a remote control that can be controlled by the five electrical power switch and lights on all the way to adjust brightness. The design can control a wide range of household electrical appliances, saving energy, a very simple operation, scalability, and as long as a little change can be used to increase other functions.
Key Words: Remote controlling circuit; Infrared emission; Infrared receiving; SCM
目录
摘 要 I
Abstract I
1引言 1
2硬件电路设计 2
2.1系统设计目标 2
2.2红外发射部分 2
2.2.1 红外发射部分结构图如图2所示： 2
2.2.2发射电路部分器件选择 2
2.2.3发射电路部分的设计 4
2.3红外接收部分 5
2.3.1红外接收部分结构图如图7所示： 5
2.3.2接收电路部分器件选择 6
2.3.3红外遥控接收器的接收过程 7
2.3.4接收电路部分的设计及原理图 8
3系统功能实现方法 10
3.1遥控码的编码格式 10
3.2设定遥控码的发射 11
3.3数据帧的接收处理 11
4.遥控发射及接收控制程序流程图： 12
4.1遥控发射部分 12
4.2遥控接收部分 13
5结论 16
参考文献 17
谢辞 18
附录1 原理图 19
附录2 程序清单(汇编语言)20
