鉴于大家对机械设计十分关注，我们编辑小组在此为大家搜集整理了“带式输送机的调试及对其液压自动拉紧装置的研究”一文，供大家参考学习!
中文字数2601,页数3 英文字数1580页数4
带式输送机的调试及对其液压自动拉紧装置的研究
带式输送机液压自动拉紧装置是根据胶带在起动和正常运转时对拉紧力的不同需要，经合理的胶带张力模型分析研究而设计的。液压自动拉紧装置是传统拉紧方式的更新换代产品，可广泛应用于煤矿、冶金、电厂、水泥厂、码头等各种散物料带式输送设备的张紧。带式输送机经过两个世纪的发展。已成从最初的雏形发展成为高带速、长运距、大功率、大运量的现代化运输工具，带式输送机广泛应用于冶金、矿山、化工、港口、电站、轻工、建材和粮食等许多上企业领域。带式输送机因其工作平稳可靠、噪声小，结构简单，运行费用低，可在任意位置加料或卸料。已成为主要的散体物料运输设备之一。由于输送带的粘弹性的特性，在带式输送机运行时为了保证必要的摩擦力，必须提供合适的拉紧力。张紧装置是带式输送机不可缺少的重要组成部分，它的性能好坏直接影响带式输送机整体的性能。
皮带输送机是由机头、机尾、驱动装置、拖辊、滚筒、中问架、皮带、清扫器等组成的。在皮带输送机安装结束，正式投入使用前，需对设备进行调试。
1.皮带输送机的调试过程
1.1皮带输送机皮带跑偏
Commissioning of the belt conveyor and automatically tighten its hydraulic device of
Hydraulic belt conveyor automatically tensioning device is based on tape and in normal operation at the start of the strain of the different needs of the tape, after reasonable analysis of tension model designed. Hydraulic automatically tensioning device is the traditional way tighten the upgrading products can be widely used in coal, metallurgical, power plants, cement plants, terminals and other bulk material conveyor belt of the take-up equipment. Belt conveyor after two centuries of development. Has become from the initial prototype development with a high-speed, long distance, high-power, the capacity of modern means of transport, belt conveyor widely used in metallurgy, mining, chemical industry, ports, power plants, light industry, building materials and food And many other enterprises on the field. Because of their steady and reliable work belt conveyor, the noise of small, simple structure and operation of low-cost, anywhere in feeding or unloading. Has become a major granular material transport equipment one. As the conveyor belt of the viscoelastic properties, in order to ensure belt conveyor running the necessary friction, we must provide a suitable strain of. Tension belt conveyor device is an important and indispensable component of its properties have a direct impact on the overall performance of belt conveyors
Conveyor belt by the nose, tail, drive, drag roller, roller, asked planes, belts, consisting of cleaning, etc.. Conveyor belt installed in the end, officially put into use, the equipment needed to debug.
A conveyor belt of the debugging process
