环境友好型SBS胶粘剂的研究

论文编号:SP063  论文字数:9326,页数:21

 摘要：SBS热塑性弹性体是苯乙烯一丁二烯一苯乙烯三嵌段共聚物。SBS用于胶粘剂，兼具良好的弹性和粘接强度、耐低温、溶解性好、溶液粘度低、固化快等优点，可制成通用型、压敏型、层压型、接触型等几乎所有类型的胶粘剂。本文中主要讨论了环境友好型SBS胶粘剂所需溶剂的选择原则及不同比例溶剂对SBS胶粘剂，研究了增粘树脂、增强树脂对胶粘剂性能的影响。其中环保性能主要从溶剂着手，选取无毒、无挥发性有害气体的溶剂制备环保型SBS胶粘剂；并研究在该溶剂条件下，增粘树脂、增强树脂及SBS弹性体的适宜填加量及在该填加量下胶体的综合性能。通过对比的方法选择综合性能较好的各个助剂的具体配比。
Abstract: SBS thermoplastic elastomer is styrene-butadiene-styrene triblock copolymer. So SBS is used as rubber adhesive, it has strong elasticity and bonding strength, low temperature resistance、good in solubility、 low in solution viscosity、 quick in solidification and so on. And it can be made into rubber adhesive in almost every types , such as the ordinary type、pressure-sensitive type、laminated type、 contact type and so on. This article primary discuss the necessary solvent’s selection principles of environmental-friendly type SBS rubber and the different impacts on different solvent’s proportional, it also has done some researches on the impacts that tie resin and reinforced resin have brought toward rubber adhesive ‘s performance.
Which environmental performance mainly from the start solvent selected non-toxic, non-volatile solvents harmful gases Preparation environmentally-friendly adhesive SBS. And the study of solvent conditions, tackifying resin, reinforced resin 、SBS reinforced elastomer and the appropriate amount of filling and fill in the amount of colloid under the comprehensive performance. By comparing the method to choose the best performance of the various additives specific ratio.
 关键词：环境友好型  SBS胶粘剂  增粘树脂 增强树脂
Key words:  environmental-friendly type   SBS rubber adhesive   tie resin    reinforced resin

目录
 
中文摘要 ……………………………………………………………………………Ⅰ
外文摘要 ……………………………………………………………………………Ⅱ
目录………………………………………………………………………………Ⅲ
1 绪论  ………………………………………………………………………………1
 1.1前言…………………………………………………………………………1
 1.2胶粘剂的环保问题…………………………………………………………1
 1.3 SBS胶粘剂的概述…………………………………………………………2
 1.4主要研究内容………………………………………………………………3
 1.5研究的目的与意义…………………………………………………………3
 2 实验部分 …………………………………………………………………………5
 2.1  仪器与材料………………………………………………………………5
 2.2  实验方法…………………………………………………………………5
 3  结果和讨论………………………………………………………………………7
 3.1  溶剂的选择………………………………………………………………7
 3.2  SBS弹性体的牌号的选择对胶粘剂性能的影响………………………9
 3.3  增粘树脂、增强树脂的选取及加入量对胶粘剂性能的影响…………10
4  总结与展望………………………………………………………………………13
 4.1 实验总结…………………………………………………………………13
 4.2 SBS胶粘剂的改性研究……………………………………………………13
 4.3  展望我国SBS胶粘剂的发展方向………………………………………14
致谢…………………………………………………………………………………15
参考文献……………………………………………………………………………16