日产150吨涂布白纸板网部、压榨部工艺设计

论文编号:QH023  论文字数:21666,页数:38  附CAD图

年产5万吨涂布白板纸制浆造纸综合工厂  重点：日产150吨涂布白纸板网部、压榨部工艺设计
 
 摘  要：本次设计是年产5万吨涂布白板纸制浆造纸综合工厂，重点为日产150吨白板纸抄纸车间网部和压榨部的工艺设计。
 本说明书对白纸板制浆造纸综合工厂进行了初步设计，阐述了建厂的必要性和可能性，同时表述了建厂地址的选择，建厂地的气象情况以及人员情况。由于本设计重点在于网部和压榨部的工艺设计，在计算浆水平衡的过程中，只计算了网部和压榨部的过程，包括压榨部，伏辊，真空吸水箱，网案，网前箱，伏辊池，圆网压缩机几个步骤。在设备选型的过程中，本设计也只阐述了压榨部和网部的设备选择和相关的计算。造纸设备采用日产150吨的2640纸机，关键部位进口，其余部分采用国产的设备。
 本说明书中关于设备的选择，劳动人员的定员，生产工艺的确定，大致参考了富阳春胜纸业有限公司，该厂在其设备的选择等方面均具有相当的经验，具有参考价值。
 设计内容包括浆水平衡计算图绘制、网部和压榨部生产工艺流程图、车间设备平面布置图、设备一览表的绘制。
    关键词：制浆造纸，白板纸，网部，压榨部

A pulp and paper-making multiple-producing mill,  which   produce 50000 tons of paperboard everyyear
  Key:Daily production of 150 tons of the Department of Coated Paperboard network, press the Department of Process Design Process Design

      ABSTRACT：The design is an annual production of 50,000 tons of paper coated whiteboard integrated pulp and paper factories, Nissan will focus on 150 tons of white paper and paper-making workshop network press the Department of Process Design.      The specification of an integrated pulp and paper factories White Board conducted a preliminary design, elaborated on the necessity and possibility of plant and at the same time address expressed the choice of plant, plant to the meteorological conditions, as well as personnel. Since the focus of network design and process design of the press section, in calculating the balance serofluid process, only the network and the process of pressing the Department, including the press section, V roller, vacuum tanks, network case, the net box, roll-volt pool, a few steps rotary compressor. In the process of selection of equipment, the design only on the Department of Press and network equipment selection and related calculations. Paper-making equipment, 150 tons per day production of the 2640 paper, the key parts of the import, the rest of the use of domestically produced equipment.      The statement of the equipment and the choice of the number of working staff, the production process to identify broadly with reference to Yangchun Fu Sheng Paper Co., Ltd., the plant in its choice of equipment, etc. have considerable experience, with reference value.      Design elements include mapping serofluid balance calculation, the Department of Network and press production process map, workshop equipment, floor plan, equipment list of the drawing.
      KEYWORDS: pulp and paper, white carton,  network department, squeezing department

目 录
摘  要 I
Abstract II
1 绪  论 1
1.1设计的背景 1
1.2  工程设计的必要性 3
1.3工程设计的发展状况 3
1.4市场需求预测与设计规模 4
1.5  设计题目的描述 5
1.5.1  简介： 5
1.5.2  产品的有关行业标准 5
2 厂址选择与厂区总平面布置 7
2.1 厂址选择 7
2.2 全场总平面布置图的介绍与分析 7
2.3 厂区总平面布置概述 9
2.4总平面布置技术指标 10
2.4.1总平面布置的评价 10
3 生产工艺设计 11
3.1造纸车间生产综合叙述 11
3.2生产工艺 11
3.3  清水流程 12
3.4  损纸流程 13
3.5 流送系统过程描述 13
4 车间公用工程 27
4.1厂房建筑与结构 27
4.2 环境保护与综合利用 27
4.3排水工程 28
4.4劳动安全卫生 29
5技术经济 31
  5.1 定员  31
5.2 工程设计综合评价 32
致 谢 33
参 考 文 献 34