网学网为需要自动化PLC相关毕业设计的朋友们搜集整理了MagicARM2200教学实验平台实验指导书相关资料，希望对各位网友有所帮助!
论文编号:DQ320 论文字数:9352,页数:27
MagicARM2200教学实验平台实验指导书
摘 要
本次课题主要是初步的了解嵌入式系统领域和应用，以及ARM的发展前景，通过MagicARM2200开发实验板来学习嵌入式系统的功能特点，选用基于ARM7TDMI-S 核、LQFP144封装的LPC2290作为主CPU。介绍了 ADS1.2和EasyJTAG－H仿真器的安装和应用，在安装过程中应注意的细节。在运用ADX调试器时如何设置中断点和观察变量，熟悉每个功能键。详细举例《MagicARM2200教学实验平台实验指导书》 中典型的汇编指令实验和步进电机实验两个例子来说明MagicARM2200开发实验板上H－Flasher配置和H－JTAG配置时设置的不同。同时以uClinux实验、MiniGUI图形界面实验说明了MagicARM2200的用途广泛。最后总结了课题中运用学过的知识和相关实验的验证结果同时提出有些实验的不足。实践经验表明，MagicARM2200开发实验板不仅是一款不错的实验教学平台，而且对学生的教学培养更有很大的帮助。
关键词：嵌入式系统 MagicARM2200 ADS1.2 EasyJTAG－H 实验指导书
Abstract
The main issue is a preliminary understanding of the field of embedded systems and applications, and ARM''s development prospects, through the development of experimental MagicARM2200 board to learn the features embedded systems, selected based on the ARM7TDMI-S nuclear, LQFP144 packages LPC2290 as the main CPU . On the ADS1.2 and EasyJTAG-H simulation for the installation and application at the same time during the installation process should pay attention to the details. ADX debugger in the use of the process and how to set up breakpoint in the observation of variables, each familiar with the function keys. For example detailed "MagicARM2200 experimental platform of teaching guide book" instruction in a typical compilation of experimental and stepper motor of experimental, through two examples to illustrate H-Flasher configuration and H-JTAG configuration settings in the different experimental MagicARM2200 development board. At the same time through experiment uClinux and MiniGUI graphical interface experiment described the extensive use MagicARM2200. Finally summed up the issue of the use of the knowledge、related experimental verification of the results and raised some of the deficiencies. The result shows that, MagicARM2200 experimental development board is not only a good experimental teaching platform, but also for teaching students the training is very helpful.
Keywords： Embedded Systems MagicARM2200 ADS1.2 EasyJTAG-H
Experimental guide book
目 录
摘要……………………………………………………………………………. . .……………..Ⅰ
1 绪论……………………………………………………………………………. . ………….1
1.1 课题研究内容及其意义………………………………………………………….……1
1.2 ARM嵌入式系统简介和发展趋势……………………….……………………….... . .1
1.3 本文工作介绍……………………………………………………………. . .…………2
2 ADS1.2软件的安装与应用……………………………………………………………..3
2.1 ADS1.2 简介………………………………………………………………………..…3
2.2 安装ADS1.2 软件……………………………………………………………………..4
2.3 为ADS1.2增加LPC2200专用工程模块…………………………………….……….4
3 EasyJTAG－H仿真器的安装与应用………………………..…………..……………5
3.1 EasyJTAG－H 简介…………………………………….………………………….......5
3.2 安装H－JTAG 软件……………………………………………………………………5
3.3 配置H－JTAG 软件…………………………………………………………………...5
3.3.1 H－JTAG 配置………………………………………………………………….6
3.3.2 H－Flasher 配置…………………………………………………………………6
3.3.3 验证并启用配置………………………………………………………………….9
3.4 EasyJTAG－H 仿真器的使用………………………………………………………….10
3.5 EasyJTAG－H 常见问题……………………………………………………………….12
3.6 EasyJTAG-H 在外部Flash 和外部RAM 调试设置…………………………………13
4 ARM嵌入式系统实验……………………………………………………………….…….15
4.1 ARM开发的调试方法概述…………………………………………………………………..15
4.2 ARM开发的调试实验……………………………...………………………………………...16
4.2.1 ADS1.2集成开发环境实验……………………………………………………..16
4.2.2 实验跳线的特点………………………………………………………………...19
4.2.3 MagicARM2200教学平台的特殊实验…………………………………………...20
5. 总结……………………………………………………………………………………………...24
致谢…………………………………………………………………………………………….........25
参考文献………………………………………………………………………………....26
