网学网自动化专业编辑为广大网友搜集整理了：基于松下GT 32的移栅机控制系统设计绩等信息，祝愿广大网友取得需要的信息，参考学习。
论文编号:ZD1078 论文字数:14768,页数:45
摘 要
针对现阶段工业生产实际需求且我国真空荧光显示屏(Vacuum Fluorescent Dis-play，VFD)生产设备依赖进口的现状，展开对移栅机控制系统的设计研究。
本课题主要是为了满足VFD生产厂家的需求，进行系统硬件设计和系统软件设计。本系统中主控单元选用抗干扰能力强、指令丰富、扩展灵活、通讯联网能力强的松下FPX-C30T可编程控制器作为控制核心，GT32M触摸屏作为监控设备，增强了系统的安全性和可操作性。课题研究中进行了大量的调试，实际证明此系统满足精度和工艺的要求。
课题的研究对于掌握伺服运动控制系统相关技术具有实用意义 ，对提高栅网在玻璃基板上的放置精度以及VFD生产设备的自动化程度有重要意义。
关键词：VFD、移栅机、PLC、触摸屏、控制系统
Abstract
Against the actual demand at the present stage of industrial production in China and Vacuum Fluorescent Display (Vacuum Fluorescent Dis-play, VFD) dependence on imported production equipment of the status quo, to start to shift the gate control system design study. The main issue is to meet the needs of VFD manufacturers, system hardware design and system software design. Main control unit of the system in selected anti-interference ability, rich instruction to expand the flexibility, communications networking capabilities of prednisone FPX-C30T programmable controller as the control core, GT32M touch screen as the monitoring equipment, enhance system security and interoperability. Research carried out a lot of debugging, the actual proof that this system meets the requirements of precision and technology. Research topics for the master servo motion control system has a practical significance related technologies, to improve the grid on the glass substrate in place as well as the accuracy of automated production equipment VFD degree of significance.
Keywords：VFD、Moves the grid machine、PLC、Touch Screen、Control System
目 录
摘要……………………………………………………………………………. . .……………Ⅱ
Abstract……………………………………………………………………………………….Ⅲ
目录…………………………………………………………………………………………….Ⅳ
1 绪论…………………………………………………………………………………………..1
1.1 选题的背景及意义…………………………………………………………………...1
1.2 本课题研究的主要内容……………………………………………………………...1
2 总体设计方案……………………………………………………………………………. . 3
2.1 生产工艺要求…………………………………………………………………….……3
2.2 系统总体结构设计…………………………………………………………………….3
2.3 栅网移动控制系统流程……………………………………………………………. . .5
3 可编程控制系统…………………………………………………………………………..6
3.1 系统硬件的组成…………………………………………………………………..…..6
3.1.1 栅网移动控制系统结构电路………………………………………………….6
3.1.2 PC机与PLC及触摸屏连接…………………………………………………..7
3.2 主控系统………………………………………………………………………………7
3.2.1 PLC简介………………………………………..……………………………...8
3.2.2 PLC选型………………………………………………………………….……8
3.2.3 FPX-C30T的组成结构………………………………………………………...9
3.2.4 FPX-C30T的技术参数及规格………………………………………………..11
3.2.5 PLC通信基本参数……………………………………………………………13
3.3 PLC的节后电路设计………………………………………………………………...13
3.3.1 输入接口电路设计……………………………………………………………13
3.3.2 输出接口电路设计……………………………………………………………14
4 人机交互系统…………………………………………………………………………….16
4.1 触摸屏简介…………………………………………………………………………...16
4.1.1 触摸屏定义及应用……………………………………………………………16
4.1.2 触摸屏工作原理…………………………………………………………..…..16
4.1.3 触摸屏检测及定位……………………………………………………………16
4.2 触摸屏选型…………………………………………………………………………...17
4.2.1 触摸屏外形图…………………………………………………………………17
4.2.2 触摸屏GT32的技术参数及规格………………………………………….....17
4.2.3 触摸屏通信…………………………………………………………………....19
5 伺服驱动系统………………………………………………………………..……….…..22
5.1 伺服驱动系统简介…………………………………………………………...……..22
5.1.1 伺服电机简介…………………………………………………………….…23
5.1.2 伺服驱动器简介………………………………………………………….…24
5.2 伺服电机选型…………………………………………………………………….…24
5.3 伺服电机驱动器选型…………………………………………………………….…25
6 软件系统设计…………………………………………………………………………....30
6.1 系统开发环境……………………………………………………………………..…30
6.1.1 FPWIN-GR介绍………………………………………………………..…...30
6.1.2 GTWIN介绍………………………………………………………………...31
6.2 控制系统程序设计……………………………………………………………..…...32
6.3 人机界面设计…………………………………………………………………..…...33
6.3.1 人机界面设计说明…………………………………………………………34
6.3.2 画面设计……………………………………………………………….…...34
7 系统调试………………………………………………………………………………….39
8 总结………………………………………………………………………………………..40
致谢…………………………………………………………………………………………….41
