700 Mbps DDR, LVDS-Capable I/Os (AGL250 and above)
1.5 V, 1.8 V, 2.5 V, and 3.3 V Mixed-Voltage Operation
Bank-Selectable I/O Voltages—up to 4 Banks per Chip
Single-Ended I/O Standards: LVTTL, LVCMOS 3.3 V / 2.5 V / 1.8 V / 1.5 V, 3.3 V PCI / 3.3 V PCI-X†, and LVCMOS 2.5 V / 5.0 V Input
Differential I/O Standards: LVPECL, LVDS, BLVDS, and M-LVDS (AGL250 and above)
I/O Registers on Input, Output, and Enable Paths
Hot-Swappable and Cold-Sparing I/Os‡
Programmable Output Slew Rate† and Drive Strength
Weak Pull-Up/-Down
IEEE 1149.1 (JTAG) Boundary Scan Test
Pin-Compatible Packages across the IGLOO Family
Clock Conditioning Circuit (CCC) and PLL†
Six CCC Blocks, One with an Integrated PLL
Configurable Phase Shift, Multiply/Divide, Delay Capabilities, and External Feedback
Wide Input Frequency Range (1.5 MHz up to 250 MHz)
Embedded Memory†
1 kbit of FlashROM User Nonvolatile Memory
SRAMs and FIFOs with Variable-Aspect-Ratio 4,608-Bit RAM Blocks (×1, ×2, ×4, ×9, and ×18 organizations)
True Dual-Port SRAM (except ×18)
ARM Processor Support in IGLOO FPGAs
M1 IGLOO Devices—Cortex™-M1 Soft Processor Available with or without Debug
IGLOO低功耗闪存FPGA系列：
The IGLOO video demo kit, developed and offered by Actels solution partner Attodyne, consists of an IGLOO video demo board and your choice of a LCD adapter board. You can choose from a series of plug-and-play display adapter boards mounted with different LCDs, ranging from 2.7 to 7 and resolution from QVGA (320x240) to SVGA (800x480). The video demo board has an IGLOO device that interfaces with several video/image sources, including DVI input and CMOS Sensor. In addition, off-chip memory is provided for data buffer and storage. The kit is initially available with an LCD adapter board containing 7 LCD panel from Toshiba, and is followed by more adapter boards with panels from other manufacturers. Please refer to the users guide for more details or contact Attodyne.
The IGLOO Video Demo Kit is a versatile development platform that demonstrates various video functions on an Actel IGLOO FPGA. The
video demo kit can be used to evaluate different video reference designs
for both video performance and power consumption. It can shorten
product development cycles by leveraging the board’s spectrum of
possible applications.
图1.IGLOO视频开发套件方框图
IGLOO视频开发套件所包括内容：
Demo Kit Contents
The IGLOO Video Demo kit includes the following
IGLOO video demo board
Display adapter board
DVI cable
Power supply adapter
CD with documents, board schematics, and a programming file (STAPL) for the FPGA for a sample design
IGLOO视频演示版包括内容：
IGLOO Video Demo Board
The IGLOO video demo board consists of the following main components:
IGLOO AGL600-FG256 device
DVI Receiver
2M x 32 SDRAM
64M SPI Flash
USB MCU
Switching regulators
2 k EEPROM (contains VESA EDID 1.3 information)
视频演示版主要特性：
Rapid evaluation and development platform with choice of multiple LCDs
Flexibility of demonstrating different IP cores for display applications
Ultra-low power IGLOO FPGA with Flash*Freeze technology
5 µW of standby power and 2 seconds in/out of Flash*Freeze mode
Free evaluation of IP cores with customizable display functions
On-Board Devices
Ultra-low power IGLOO AGL600-FG256 FPGA device
2 MB x 32 SDRAM for frame buffer
64 MB flash for image and data storage
Interfaces
5 user buttons and reset
2 RJ-45 connectors for 8 pairs of LVDS outputs
Plug-and-play to display adapter board via 50-pin connector
DVI-D input
26-bit connector for Micron CMOS Sensor headboard
JTAG programming connector
图2. 视频演示版外形图
下面是视频演示版电路图：
图3. 视频演示版电路图（1）
图4. 视频演示版电路图（2）
图5. 视频演示版电路图（3）
