鉴于大家对理学论文十分关注，我们编辑小组在此为大家搜集整理了“缓冲包装设计系统与仿真研究”一文，供大家参考学习!
论文编号:BZ024 论文字数:10761.页数:35
摘 要
本论文重点介绍了缓冲包装设计系统构成及各主要功能模块特点及功能实现等；并对以缓冲包装CAD系统设计好的液晶显示器包装件用ANSYS/LS-DYNA 有限元软件进行跌落仿真分析，研究不同跌落情况下包装件各构件的响应。
缓冲包装设计系统由产品脆值求解模块、缓冲设计与校核模块、纸箱结构设计与校核模块、纸箱结构优化设计模块和缓冲包装设计方案输出模块五大模块组成。液晶显示器包装件的跌落仿真研究是先根据缓冲包装CAD系统设计好的包装件模型建立有限元模型，然后对整个包装件进行仿真跌落，最后对各构件受力及变形情况进行分析。
关键词：缓冲包装,计算机辅助设计（CAD）, 有限元分析, 仿真
Abstract
It introduced the structure of cushion packaging design system and the characteristics of the major function modules and the way to implement them. It is ANSYS/LS-DYNA to finish the finite element analysis of the LCD package which designed by the above cushion packaging computer aided design system so as to study the response of the different components in different falling way.
The cushion packaging design system is composed of five major modules as following: product fragility solving module, cushion package designing and verifying module, corrugated case structure designing and verifying module, corrugated case structure optimization and designing module and results outputing module. The first step of finite element analysis is to set up a finite element model with the package model from the cushion packaging CAD system. And then, you can make the simulation by falling the package in different way. Finally, analysis the force and deformation of each components when the package falls in different way.
Keywords: Cushion packaging; Computer aided design(CAD)
Finite element analysis(FEA) ; Simulation
目 录
缓冲包装设计系统与仿真研究 2
摘 要 2
Abstract 3
目 录 4
1. 绪 论 5
1.1 项目研究的背景 5
1.2 项目研究的目的和意义 6
1.3 拟研究的问题 7
2 缓冲包装CAD系统及ANSYS/LS-DYNA有限元分析软件 8
2.1缓冲包装CAD系统构成及各功能模块 8
2.2 ANSYS/LS-DYNA有限元分析软件 12
3 基于ANSYS/LS-DYNA的液晶显示器包装件的有限元分析 15
3.1 缓冲包装设计 15
3.2 缓冲包装CAD建模 16
3.3 显示器与包装件有限元模型的建立 20
3.4 材料性能参数设置 23
3.5 仿真跌落分析 23
4 结果与分析 26
4.1 面跌落 26
4.2 角跌落 29
4.3 棱跌落 31
结 论 34
致 谢 35
参考文献 36
