发光体漆喷涂设备设计

机械设计制造及其自动化论文，论文编号:JX1466  论文字数:17099.页数:32  附CAD图

摘     要

 本次设计主要完成发光体漆喷涂方法研究、发光体漆喷涂机械设计、零部件工艺设计。我国漆包线工业近10年来发展很快，但生产设备和工艺与发达国家相比尚有一定差距。在我国目前的漆包线生产企业中,大约有80%以上的企业仍然在采用80年代后期的生产设备。产品产量低，生产效率低，生产成本高等一系列因素是该类产品的通病。这一点严重制约着企业的发展，同时也造成了资源的极大浪费。
 通过对发光体漆喷涂方法的比较与分析，采取模具法喷涂是目前较先进和有效的喷涂方法模具法喷涂不仅能节省涂料,减少空气污染,而且可以使喷涂工艺机械化、连续化、减少废品率,大大提高劳动生产率,改善劳动条件。
关键词：喷涂方法  设备  工艺  漆包线

Abstract
     The author mainly researches the illuminant spray-painted method, engineers the illuminant spray-painted machine and designs parts technologically in the design. In recent 10 years, the enamelled wire industry in China has developed rapidly. However,there has been gaps between China and the developed countries on the production equipments and techniques. In the present enamelled wire corporations, about over 80% of them are still adopting the production equipments from the last 80s. Therefore,their products with a poor quantity, low productive efficiency and high manufacturing cost and so on are inevitable, which will cause the development of the corporations to be impeded as well as waste of resources greatly.
 Compared with the illuminant spray-painted method,the mould spray-painted method is more advanced and efficient.It can not only save the paint and reduce air pollution,but also make the spraying technique mechanization and continuity, cut down the number of rejects and secnds, raise labour productivity and improve working conditions.
 Key words: Spray-Painted Method;the Production Equipments;Technique; the Enamelled Wire

目  录
中文摘要 I
英文摘要 II
目录 III
第一章  绪论 1
1.1   课题的提出 1
1.2   国内外漆包线生产状况以及差距 1
1.3   论文內容概述 3
第二章  发光体漆喷涂方法的选择 4
2.1   喷涂方法分类 4
2.1.1  等离子喷涂 4
2.1.2  静电喷涂 4
2.1.3  模具法和毛毡法喷涂 4
2.2  细微铜丝绝发光体缘漆喷涂方法的选择 5
第三章  发光体漆喷涂工艺及设备设计 6
3.1  喷涂总体工艺分析 6
3.1.1  喷涂总工艺 6
3.1.2  供漆系统 13
3.1.3 漆包炉和废气处理 14
3.2 发光体漆喷涂设备设计及计算 15
第四章  模具涂漆的运用及其工艺 19
4.1   模具的介绍 19
4.2  涂漆模具的配模 19
4.2.1 配模时应考虑的主要问题 19
4.2.2  配模设计及计算 20
第五章   结论 25
参考文献 26
致谢 27

附录