气门摇臂轴支座的机械加工工艺及夹具设计 二

论文字数:19612,页数:33 附任务书，开题报告，外文翻译，CAD图

气门摇臂轴支座的机械加工工艺及夹具设计
摘要：机械加工行业作为一个传统而富有活力的行业，近十几年取得了突飞猛进的发展，在新经济时代，行业呈现了新的发展趋势，由此对其它的质量，性能要求有了新的变化。现在机械加工行业发生着结构性变化，工艺工装的设计与改良已成为企业生存和发展的必要条件，工艺工装的设计与改良直接影响加工产品
的质量与性能。 
    本文首先介绍了气门摇臂轴支座的作用和工艺分析，其次确定毛坯尺寸，然后进行了工艺规程设计，最后进行夹具设计。此次设计是对气门摇臂轴支座的加工工艺和夹具设计，其零件为铸件，具有体积小，零件结构简单的特点，由于面比孔易加工，在制定工艺规程时，就先加工面，再以面为基准来加工其它，其中各工序夹具都采用专用夹具，其机构设计简单，方便且能满足要求。
关键词：气门摇臂轴支座，工艺分析 ，工艺规程设计 ，夹具设计

The machining process and fixture design of the Valve Rocker Arm Bearing support

Abstract:Machining industry ,as a traditional and vibrant industry, has been rapidly developed for a few past decades. In the new economic area,the industry presented a new development trend,and the trends also changes the quality and the performance of the production in some new abstracts. Machining industry is now taking place in structural changes, process design and improvement of equipment has become the necessary conditions of the enterprise survival and development, process equipment design and improved products directly affect the quality and performance.
   This article introduces the role and process analysis of the valve rocker arm bearing support,followed by determining blank size, and then proceed to order the design process, the final fixture design. What will be disgned is The machining process and fixture design of the Valve Rocker Arm Bearing support,which has the chatacteristics of three abstrcat.its components for castings, with a small size, simple structure and the characteristics of parts,because the surface is easier than the easy processing, point of order in the development process, the surface on the first processing , and then to surface as a benchmark to other processing, including the processes used special fixture, and its design is simple, convenient and can meet the requirements.

KEYWORDS: Valve rocker arm bearing support, process analysis, Process design, fixture design

目录
1绪论1
 1.1 本设计的内容及意义……………………………………………….….1
 1.2 课题背景知识………………………………………………….……….…2
 1.2.1 零件的作用……………………………………………………………2
 1.2.2柴油机相关知识介绍 2
 1.2.3 机械制造工艺技术相关知识3
 1.2.4 机床夹具设计基础知识4
2 气门摇臂轴支座的机械制造工艺规程设计 7
 2.1 零件的工艺分析及生产类型的确定 7
 2.1.1零件的作用 7
 2.1.2零件的工艺分析 8
 2.1.3确定零件的生产类型 9
 2.2 选择毛坯，绘制毛坯图 10
 2.2.1选择毛坯种类 10
 2.2.2确定毛坯尺寸及机械加工总余量 10
 2.2.3设计毛坯图 12
 2.2.4绘制毛坯图.12
 2.3 选择加工方法，制定工艺路线 12
 2.3.1定位基准的选择 12
 2.3.2零件表面加工方法的选择 13
 2.3.3加工阶段的划分 14
 2.3.4工序的集中与分散 14
 2.3.5工序顺序的安排 15
 2.3.6确定工艺路线 16
 2.3.7加工设备及工艺装备的选择.17
 2.3.8工序间余量的确定.18
 2.3.9切削余量及基本时间定额的确定 20
3 气门摇臂轴支座专用夹具的设计.30
 3.1确定夹具的结构方案 30
 3.1.1确定定位方案，选择定位元件.30
 3.1.2 确定导向装置32
 3.1.3确定夹紧机构.32
 3.1.4确定辅助定位装置.33
 3.2设计夹具体 33
 3.3 夹具装配图上标注尺寸、配合及技术要求 33
总结 36
参考文献 37
致谢 38