网学网电子机械编辑为广大网友搜集整理了：吸尘器面板盖注射模设计绩等信息，祝愿广大网友取得需要的信息，参考学习。
材料成型及控制工程论文，论文编号:JX1399 论文字数:19672.页数:59
摘要
近年来，塑料产品和塑料模具得到了飞速的发展，应用也越来越广泛。本文为吸尘器面板盖设计了一副注射模。设计过程主要利用了UG和AutoCad工具软件，充分利用计算机辅助的优越性实现了设计方案。首先分析了塑件的工艺性，选择了单分型面模具，并利用UG Moldwizard模块完成了成型零部件的建模。然后，根据设计计算结果，在UG中完成了模具的推出机构、导向机构及其它结构零部件的建模。最后利用AutoCAD绘制了该副模具的总体装配图和一些重要零件的零件图。所设计的模具结构简单，机构运行可靠，所绘制的模具图纸对实际生产具有指导意义。
关键词: 注射模 UG AutoCad 计算机辅助设计
Abstract
In recent years, plastic products and plastic mold has developed rapidly and their applications become more and more extensive. One injection mold for a type of vacuum cleaner’s covere was designed in this dissertation. The software tools of UG and AutoCad are mainly used in the design process，and the advantages of computer-aided design programs was fully utilized to achieve the design scheme. .Firstly, the author chose a single parting surface for the mould according to the analysis of the plastic part craft, and finished mold parts modeling with the UG Moldwizard. Then based on the design results, all the other components assemblies were modeled in the UG, such as the modeling of ejection parts, guide parts ,and other structure parts and so on. Finally. the assembly drawing and some of the important parts drawings were made in the AutoCad. As a whole the mould is simple in structure and good at working reliability. The design of this injection mold is of some significance for the fact production.
Keywords: Injection mold; UG; AutoCad; Computer-aided Design
目录
摘要 i
Abstract ii
目录 iii
第一章 绪论 1
1.1 引言 1
1.2 塑料简介 1
1.3 CAD/CAM的发展历程 2
1.4 基于UG的塑料模具CAD/ CAM 3
1.5 小结 4
第二章 注塑模具设计与计算 5
2.1 吸尘器面板盖注射模CAD/CAM/CAE的工作内容 5
2.2 塑件工艺性分析 8
2.2.1 塑件整体结构的分析 9
2.2.2 塑件工艺性的分析 9
2.3 型腔数目的确定 10
2.4 分型面的选择 10
2.5 浇注系统设计 11
2.5.1 浇注系统的设计 11
2.5.2 主浇道设计 12
2.5.3 浇口设计 13
2.6 成型和结构零件的设计 14
2.6.1 型芯和型腔的生成 14
2.6.2 材料的选择 19
2.6.3 排气结构和分析 20
2.6.4 侧抽芯机构的设计 21
2.6.5 导向机构设计 21
2.6.6 型芯杆设计 23
2.6.7 紧定螺栓的选取 23
2.7 模架的选择与模具结构设计 24
2.8 冷却系统设计 25
2.9 注塑机型号选择 26
第三章 UG NX 加工 28
3.1 UG NX加工模块简介 28
3.2 UG NX加工模块的特点 28
3.3 滑块的加工 29
3.3.1 工艺分析 29
3.3.2 滑块加工工步 29
3.3.3 加工程序NC代码 30
第四章 总结 51
参考文献 52
致谢 53
